AI for maintenance management
A hands-on course for maintenance and operations: every output the tool writes is checked against a source before it enters the work. Work orders, fault reports, preventive-maintenance instructions and risk surveys.
In every course, the verification gate method: a number that was not verified does not exist.
Who it is for
- Mechanical technicians
- Mechanical and maintenance programmes
- Maintenance and operations staff in industry
Prerequisites: A laptop or a phone with at least one AI tool. No prior AI knowledge is needed.
Structure
- Full course: 14 sessions × 2 hours
One session a week, all in class. A 45-minute quiz without AI and a final project.
The sessions
- The work map and the engineering promptA work order and a prompt library
- Technical EnglishA decoding sheet for a manufacturer's manual
- The machine fileA machine notebook and 10 checked questions
- Reading a drawingA dimensions table and an error rate
- Field inspectionA photographed inspection report
- System schematicsAn operating description and 3 errors found
- Supporting calculationsA sheet with checked formulas
- Fault report (RCA)An RCA report
- Preventive maintenanceA work instruction and a PM plan
- Safety and standardsA risk survey
- Procurement and confidentialityA specification and a supplier comparison
- Quiz without AI and final projectAn alternatives chapter and an AI declaration
- Agents and presentationsAn 8-minute presentation
Each participant leaves with
- A portfolio with 3 verified deliverables
- A fault report (RCA) and a preventive-maintenance instruction
- An 8-minute presentation